Unfortunately, humanity has not yet come up with such designs for windows so that they could be installed once and for several centuries ahead. Therefore, at a certain hour there comes the moment when it is necessary to dismantle the old double -glazed window. According to experts, this process is considered the most time -consuming and long, and in its complexity it is inferior only to installation work. In this regard, I would like to consider the dismantling process and all its subtleties in detail.
Cases when it is necessary to carry out dismantling
In modern society, plastic windows are in great demand for a number of reasons, including a long service life. These products can stand unnecessarily in the repair of about half a century, so the dismantling work is mainly related to the desire of the owner of the apartment to change the old double -glazed window for a new one, which has higher energy conservation and thermal protection. It may also be associated with mechanical damage to the double -glazed window or frame.
Before taking off the window frame, you need to do the following:
Free the room from extraneous things (remove all equipment and small furniture items).
Isolate the remaining furniture with a special film to protect against mechanical damage, as well as dust.
Isolate all the walls and floor.
Of course, you can do without insulation with a film, but do not forget that even the most accurate builder will still not be able to avoid the appearance of a huge amount of construction dust. Therefore, it is better not to get used to and purchase construction polyethylene to cover the floor.
Next, you should take care of security, and for this it is necessary to protect the venue for dismantling. A marking tape, which is installed in order to prevent passers -by about the danger, that is, the possible falling out of construction waste, will help to cope with this task. You need to carefully monitor the dismantling process in order to prevent the output of the structure of the structure on the street. Thus, it will be possible to avoid unpleasant and dangerous situations.
Tools for dismantling
After completing the preparatory stages, you need to get the right tool. To remove the double -glazed window, you need:
A sharp knife, preferably with a folding blade;
set of screwdrivers and one chisel;
scraps, preferably somewhat and small, as they are used as levers;
hacksaw (for metal and for plastic);
Pla -rods, chisel and hammer.
Perforator and screwdriver are optional, but their use will significantly reduce the temporary costs for dismantling.
If you need to find out the prices for plastic windows in Yekaterinburg, see the site.