Sometimes it’s not enough just to move the furniture so that in the office or at home it is more comfortable, sometimes you have to resort to more decisive measures, such as dismantling partitions and walls in the room. As a rule, the main building material, as before, is now a brick, it is it that is the basis for the construction of additional walls in the rooms. But do not think that it will be easy to remove the wall of brick. For such actions, a special construction tool and preparation will be useful. If the repair is started global, then it is worth contacting professionals, they will do everything as efficiently and quickly as possible.
Before starting work, check that this will not be a supporting wall, pay attention to the BTI plan. The thickness of the usual wall is no more brick, therefore, it will not be difficult to eliminate it and do not forget to legalize the redevelopment.
When you decide which wall are demolished, de -energize this part of the room, it is advisable to neatly remove the wiring manually, the furniture in the room must be covered with special material and stock up with bags for garbage removal.
The most necessary tool for dismantling will be a perforator, since it best destroys the masonry, but if there is no punch, then a jack of a hammer or a sledgehammer will fit. In the case when repairs were previously carried out in the premises, whitewashing is probably present on the wall, it must be removed to facilitate the work.
Dismantling, as a rule, should start from above the wall. It is recommended to remove bricks in rows from top to bottom. In the event that the wall does not need to be completely demoned, then it is worth making holes where you do not need to demolish. It is better not to throw a brick fight into a garbage chute, it can be sold.
Do not take out bricks in large pieces, try to separate them from each other, since huge pieces are much more difficult to dispose of, and they will take away much more forces. Focus on how much easier you are lifting alone. Do not let pieces of material fall on the floor, unless of course you are going to make a major overhaul in the room. Try to carefully extract bricks from the wall. Remember that the wall needs to be moistened, so there will be much less dust.
When everything is done, it will not be superfluous to carry out a control cleaning by a perforator. Get ready for the fact that reinforcement can be seen from the bearing walls, it must be removed with a grinder. Now we know that for the demolition of the wall we need: a chisel with a sledgehammer, a punch, a jack of a hammer and a grinder