It is best to build a bathhouse from wooden building material, for this perfectly a profiled beam from coniferous wood of coniferous wood is desirable. These are environmentally friendly and natural building materials that will only increase the benefits of the bath. A classic bathhouse consists of a couple of rooms: a united room with a steam room, a washing room and a dressing room. Currently, bath rooms are in great demand, where the raging and paired room are separate from each other. If you want to order a replacement of the castle larva, then you should go to the link given.
Paul in the bath room, the ceiling of the bath must be insulated with insulation not grief.
The ceiling should be about two meters high, so that heat and steam are at the level of a person, and do not go upstairs. So that the floor does not slip, it must be covered with rough or wooden tiles.
Bath partitions are best made with light, without insulation, frame. It is necessary that the heat from the furnace diverges throughout the bath, and the insulation will gradually isolate the room.
In the washing room you need to install tanks with cold and hot water. The floor must be made with a bias and bring a ladder for water to leave it, it is better not to install insulation in the floor.
The bathhouse has the main room – this is a steam room. The threshold should be there high, and the door with a low triber to maintain heat and steam.
In the intervals between the boards of the regiments should make gaps, moisture will drain there. To reduce light losses, foil is laid between the wooden sheathing and the wall of the steam room.