Building materials made of wood are divided into materials made of whole wood or from lumber, which are formed in the sheets due to special processing. Building materials produced in this way have high quality and are used in various areas of construction.
The wood array is a solid wood processed with various ways – galled logs, boards, timber. Building materials from the wood array are the highest quality and environmentally friendly material.
Used in the construction of residential buildings and other buildings, for the manufacture of furniture, for carpentry work.
Plane veneer. At the heart of the manufacture of coniferous fiber of wood, located in parallel. Is a bars or slab. It has high strength. Atmospheric precipitation transfers easily.
Plywood. It is made of chips or veneers, which are cut off from a whole log, and then glued together and the plate is obtained. Two types of stove: plywood and carpentry.
The carpentry plywood is used in furniture splendor. Conventional plywood is used in building structures for the manufacture of formwork, for lining (alignment) of walls.
Chipboard or wood-piece plate. Method of manufacture: crushed wood particles are taken, mixed with the composition for binding particles and pressed in sheets that have different thicknesses.
The connection of the particles is chaotic, non -focused. As a result, a material that is not subjected to deformation with a high indicator of wear resistance is obtained.
DVP or wood-fiber slab. Is a sheet material. It turns out a hot pressing of the mass obtained by grinding and subsequent fermentation of wood waste, with the addition of strengthening substances.
It has a wide range of application: internal wall sheathing, outer wall sheathing, flooring for finishing, as a heater, in the manufacture of furniture. On TPLITUKRANE. . You can choose these materials.
Stove. Has qualitative characteristics similar to plywood. It turns out as follows: a special unit breaks down the wood into large chips and laids in a certain direction.
The outer layer of chips perpendicular to the previous. Layers are glued under pressure. The plate has good mechanical properties. Areas of application – construction, furniture industry.