Recently, more and more people are considering the possibility of installing noise -absorbing sewage. It’s no secret that the sound that appears during the contact of sewage and water with a plastic pipe is quite loud.
There are three main methods with which you can get rid of unpleasant noise. The first method is to install flexible fixing systems. The second solution is the use of special soundproofing materials (in the case of using a standard sewer system). The last method is to install special connecting elements of the sewer system. We advise you to buy a silent sewer – in the Moscow Silent -Pipe store. . Consider the features of the implementation of each decision.
To reduce the noise of the sewage system, experts often use fasteners that have a unique design. It must be emphasized that the cost of such parts is a fairly high. In addition, it is very difficult to install them on your own, since even a minimum error can lead to a negative result.
The second solution may be a real salvation for people who have no desire to change the usual sewage system. The pipes are simply wrapped with special material, after which they are installed in a pre -made niche. Although the noise is really reduced, the spread of oscillations can occur through the fastening elements. In addition, the cost of the material and work performed may unpleasantly surprise.
The third method is the use of pipes with thick walls, as well as polypropylene fittings that perfectly extinguish all vibrations. The disadvantage of such a solution is the relatively high cost of materials.
To create a really silent sewage system, it is very important to carefully calculate everything and install it, given all existing requirements and rules. First you need to determine the required sizes and cut the pipes. The edges of the right part of the pipe must be cleaned with a file.
Check the correct installation of the sealing ring, remove contamination from the inner surface of the bell, the edges of the pipe segment, as well as the sealing element. We apply a special lubricant to the smooth part of the pipe and push the bell. We mark the place of contact and pull out the pipe by about one centimeter. The length can vary as a result of temperature changes, which must be taken into account.