A private house or cottage requires constant attention of their owners. Either the roof will flow, then the fence will glance, then yes, where the nail must be driven, and where the slate is replaced. And sometimes it is necessary to slobber, if, for example, a new stove was laid out, or the partition was built, or the base completely collapsed.
First of all, it is necessary to prepare the surface for future plaster. If this is an old brick base, then it must be thoroughly cleaned with a metal brush, deepened the seams, moisten abundantly with water and only then apply a plaster solution. A septum of wood can be overtaken with boat or metal nets. It is good if the grid is from the galvanizing, then it will not rust and last longer, but you can use a simple metal mesh, after painting it with oil paint. If there is no pun or grid, you can use small nails, which are driven into a wooden partition for a third of the length, after which they need to bend the hammer. A wooden surface (and brick) before plaster should also be moistened with water. You will need generators for giving.
A plaster solution is applied in two, or more layers. First they throw the first, thicker layer, align it and let them grasp. Then apply the second layer, thoroughly align and grind.
After drying, the plastered surface can be painted, whitewashed, wallpaper or facing tiles glue on it.