The gazebo is an indispensable element of any cottage site or cottage. It is not difficult to build it if you know the manufacturing technology. Traditionally, the gazebo is made of lumber, which are treated with antiseptic agents. If the gazebo is built with its own hands, then the racks are dug into the ground. Since there are no elements in this design that would provide stiffness of the gazebo, a steel fiber is used.
Description of the article:
The gazebo is great for the garden, especially if a place to relax is assumed. In this case, the gazebo will be an addition to the overall structure. A simple gazebo can be installed on four racks, use a tank roof, which will require strict boards and a canvas cover cover. During the installation process, foundation racks can be shortened.
Materials for manufacture
For a partially equipped gazebo, 12 racks and boxes of different colors will be required. If it is supposed to install built -in furniture in the gazebo, then 16 racks and 2 benches will be required. The corner gazebo is assembled from 8 racks and walls-shirts, which are made from the average thickness of the planks.
The roof is also a hinged structure. The gazebo is stained based on decorative considerations, since lumber from which individual elements of the future structure are made are impregnated with an antiseptic. Nevertheless, for the gazebo for a long time to look like new, it is necessary to treat with oil. Without additional application, it can acquire an unpleasant shade.
To finish the gazebo, you can use paints and varnishes that penetrate the wood. The advantage of the coating is the formation on the surface of the film, which over time does not deform and does not crack under the influence of temperature fluctuations and humidity.
Preliminary work
There are several ways to protect a wooden gazebo: 1) a plot that will be used for the gazebo is covered with a pond film that is protected from grass germination. 2) the foundation must be marked, for this the triangle is used. 3) foundation plates must be placed in such a way that the inter -central distance is at least 60 centimeters. 4) Lags are installed in height, supporting structures are attached to them, which should protrude for the required value from below. 5) Before laying the floor boards, it is necessary to check the position of the lie, for this the level is used. On both sides, the flooring boards are cut off.