All PVC plastic window sills almost spilled out window sills from natural wood. But still, this time a capricious fashion played a very angry joke – many times the tree is more practical, more aesthetic and environmentally friendly than PVC. However, all the positive sides of the wooden windows are impressive. The advantages of wooden windows. It should be noted, first of all, the entire environmental safety of a wooden window sill, because in the winter season, heated from the battery, she absolutely does not distinguish any harmful substances, like all plastic counterparts. Only properly processed wood for the windowsill is capable of serving for more than one ten years, because this is a very durable and reliable material. And, in the end, natural wood in the interior is a kind of indicator of the status of the owners and the prosperity of the owners. Also, a wooden train can become the most stylish art object that sets the tone for absolutely the entire room.
How to make a wooden windowsill? First of all, you need to choose the most suitable material for your future window sill. Be sure to be thoroughly dried, and there should not be any cracks, knots and other defects on it. All selected material is most carefully processed on all sides with a shirt, and after this the board you need to give the entire desired shape and cut off the tears and strokes-relatively small, in a width of 8-10 millimeters, in a depth of about 6-8 millimeters, grooves, which are 1- 2 centimeters are removed from the front side of the board. Next, the board is cut to the length you need. Boards for the windowsill are often made by composite, because 4k them in case of damage can be very easily fixed by all improvised means.
Immediately before installing a wooden windowsill, it is worth making sure that absolutely all window boxes are located at one horizontal level, and the length of the board is more than 10-15 centimeters than the width of the window opening itself. The protocolian speech of the window sill should ideally be at least 6-7 centimeters.
How to install a window board? The lower part of the board before installing it must be covered with an antiseptic felt. Exactly everything, the same should be done with the edges of the board, if they are closed into the walls. Next, the board is inserted under the lower block of the box. Additionally, the board is strengthened by long nails, the hats of which are necessarily chopped off, and are completely injected into the lower beam. All the main mounting of the window sill is performed using a lime-gypsum solution. It is worth paying attention to the fact that the internal slope should not exceed one degree.