Plant transplant.
When you transplant the old begonia into a new pot or transfer a hundred bushes of tomato seedlings to peat pitch, a convenient workplace makes the work with a complete pleasure. There is a large enough table in front of you, but not too wide, so reaching the opposite edge is not very difficult. On a shelf under the countertop, it is convenient to hold clay pots and tools necessary for the transplantation of plants.
Lumber
• Cedar board 10 feet long and 2 × 6 inches
• 4 cedar boards with a length of 8 feet and a cross -section of 2 × 6 inches
• Cedar board 10 feet long and 2 × 4 inch
• 3 cedar boards of 8 feet long and 2 × 4 inches
Furniture
• about 100 screws 2 inches long
Tools
• Pencil
• wood saw
• Electric drill
• Spiral drill with a diameter of 32 inch
• Survival head
• Roulette
• carpenter
Although for the gardener such a rustic table is simply indispensable, for him there is another application in your yard. Put the table next to the grill, and you will have enough space for cooking and serving barbecue. If you screw several hooks on the ends of the table, you can hang long knives, spills and other necessary utensils on them. In addition, on this table you can keep children’s toys and sports supplies: Badminton rackets, a set for playing croquet, darts, etc. p.
Sawing lumber.
Cut from boards with a cross -section of 2 × 6 inches six boards 47 inch for a countertop (a) and seven boards with a length of 29 inch for the lower shelf (b). From boards with a cross -section of 2 × 4 inches, cut two boards with a length of 45 inches for the front and rear parts of the frame (B), three boards long
29 inches for the side parts of the frame and crossbars (G), four legs (D) 30 inches long and two boards 42 inch for the supports of the lower shelf (E).
Table manufacture.
Gather a frame that will serve as a support for the countertop, attaching with screws the front and rear parts (c) to the side parts and the crossbar (g). Then fasten the legs in pairs, attaching them with screws to the supports (D) at a distance of 10 inches from the ground level. Attach the tops of the legs to the inner corners of the frame, then attach the countertop (a) and the boards of the lower shelf (b) to the place.